|
AccuSizer
Specifications
|
|
Specifications
|
780/A
|
780/APS
|
780/SIS
|
|
Samples/Applications
|
Suspensions,
Emulsions, Slurries, Dispersed Powders
|
Slurries,
Inks, Paints, Emulsions
|
Water,
Injectables, Clean Chemicals
|
|
Sensors
|
LE400-05,
LE400-1, LE1000-3
|
LE400-05,
LE400-1
|
LE400-05,
LE400-1, LE1000-3, LE2500-5
|
|
Wet
or Dry
|
Wet
only;
Aqueous or Organic
|
Wet
only;
Aqueous or Organic
|
Wet
only;
Aqueous or Organic
|
|
Power
Requirements
|
110-120
VAC, 60 Hz or 220-240 VAC, 50 Hz
|
|
Dimensions
|
Counter:
W12"xD18"xH7"
Autodilutor:W10"xD18"xH22"
|
Counter:
W12"xD18"xH7"
Autodilutor:W10"xD18"xH22"
|
Counter:
W12"xD18"xH7"
Syringe Sampler:W13"xD10"xH13"
|
|
Wetted
Surfaces
|
Glass,
Teflon, Kel-F,
Viton (optional Kelrez replacement)
|
Glass,
Teflon, Kel-F, PEEK,
Viton (optional Kelrez replacement)
|
Glass,
Teflon, Kel-F,
Viton (optional Kelrez replacement)
|
|
Stirring
|
Magnetic
or Mechanical
|
Magnetic
|
Magnetic
or Mechanical
|
|
Unique
Specs/Features
|
Flow
Rate: 30-120 ml/min,
5% Accuracy,
50, 100, 250 ml Dilution Flasks
|
Flow
Rate: 60-180 ml/min,
5% Accuracy,
Single or Double Stage dilution,
Variable Syringe Volumes,
Variable Loop Sizes,
DLS module
|
Flow
Rates: 10-60 ml/min, 3% Accuracy,
Volume Accuracy: 5%
1, 2.5, 5, 10, and 25 ml Syringes
|
|
Requirements
|
Diluent
Supply,
Waste Reservoir
|
Diluent
Supply,
Waste Reservoir,
Air Pressure: 30-50 PSI
|
Waste
Reservoir
|
|
Computer
Requirements
|
Pentium
III or better microprocessor, Windows 98 or better operating
system, 10 Gigabytes hard drive or better, 128 Megabytes
RAM or better, CD-Drive.
|
|
| |
| |
|
Specifications
|
780/DPF
|
780/PALS |
780/OL |
|
Samples/Applications
|
Free
Flowing Powders
|
High
Viscosity Fluids, Oils, Lubricants, Clean Chemicals |
Slurries,
Inks, Paints, Emulsions |
|
Sensors
|
LE2500-5,
LE5000-5
|
LE400-05,
LE400-1, LE1000-3 |
LE400-05,
LE400-1 |
|
Wet
or Dry
|
Dry
only
|
Wet
only;
Aqueous or Organic |
Wet
only;
Aqueous |
|
Power
Requirements
|
110-120
VAC, 60 Hz or 220-240 VAC, 50 Hz
|
|
Dimensions
|
Counter:
W12"xD18"xH7"
Feeder:W5"xD13.5"xH10.5"
|
Counter:
W12"xD18"xH7"
Chamber:W12"xD8"xH14"
Buret Box:W8.5"xD18.5"xH15.5" |
W20"xD9"xH36" |
|
Wetted
Surfaces
|
Glass,
Stainless Steel, Delrin,
Viton (optional Kelrez replacement)
|
Stainless
Steel, Delrin, Teflon, Glass,
Viton (optional Kel-F replacement) |
Glass,
Teflon, Kel-F,
Viton (optional Kelrez replacement) |
|
Stirring
|
Does
not apply
|
Magnetic |
Magnetic |
|
Unique
Specs/Features
|
Flow
Rate: 3 l/min,
Air Velocity in flow cell: 7.5 m/sec,
Critical Orifice Flow Control,
Three Stage Filtration,
125 ml Removable Sample Recovery Vessel,
Adjustable Vibration Amplitude,
Vibration Frequency in Feedback to Adjust Sample Introduction
|
Chamber
Pressure Range: 0-65 PSI,
Chamber Vacuum: 0-26 in. Hg,
Liquid Viscosity Range: Up to 85 cS |
Flow
Rate: 60-180 ml/min,
5% Accuracy
Single or Double Stage Dilution,
Variable Syringe Volumes,
Variable Loop Sizes,
DLS module |
|
Requirements
|
Vacuum
Pump 5-10 PSI
|
Air
Pressure: 100-150 PSI,
Waste Reservoir |
Diluent
Line at 30-50 PSI,
Waste Line,
Sample Line at 30-50 PSI |
|
Computer
Requirements
|
Pentium
III or better microprocessor, Windows 98 or better operating
system, 10 Gigabytes hard drive or better, 128 Megabytes
RAM or better, CD-Drive.
|
|
 |
|
|