T-80, T-350NN, T-350CN SuperClones can:

-remove foreign matter from paper and pulp
-remove sand, metal, and printing ink from waste pulp
-remove sheaves and straw fiber from pulp
-separate and classify abrasive powders in the size range 10-20 um

SC-100 and SC-150 SuperClones can:

-separate and classify ceramic calcium carbonate powders in the range of 10-100 um
-separate and classify metal oxide slurries in the range of 10-50 um
-separate and classify abrasive slurries
-separate and classify iron ore slurries in the range of 50-100 um
-separate and recycle zinc particles from dust in ironwork furnaces

LP SuperClones can:

-eliminate clogging problems as a result of its large bore nozzle. This increases the efficiency of removing dust.
-stabilize the pressure and flow rate, maintaining the efficiency of dust removal resulting in higher yield.
-remove dust using only the inlet pump and pressurized water pump, thereby reducing power consumption.
-control and reduce labor costs because of its easy operation.
-prevent the presence of air bubbles because of its air-tight construction.
-conserve on installation space.

LP - TR SuperClones can:

-simultaneously separate light and dense components of pulp in one stroke.
-perform dust-removal and stock recovery efficiently.
-permit removal of lightweight, foreign matters and simultaneous separation of floating bubbles.
-save electric power since only two pumps, i.e. the material and pressure-water pumps, are required, until final processing.
-maintains all of the features of the LP SuperClone

Flexibility for custom made products

Testing equipment specifications differ widely from company to company and application to application. Making the most of the technical knowledge accumulated over the years, we will provide products tailored to your specifications.